Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : How do you replace the engine mount of the Volkswagen Passat?

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3C, B6 - Years 2005-2010
Part: Engine mount
Operation: How do you replace the engine mount of the Volkswagen Passat?

In order to replace the engine mount of the Volkswagen Passat, you need to open the hood so that you can access the components located inside the engine compartment. Here, you will need to completely remove the air filter box and the coolant reservoir. Underneath these two components, you will be able to locate the side mounts of the engine block, which can be released by unscrewing the appropriate bolts. At this point, you can insert the new mounts, securing them with the appropriate screws, and reassemble the removed components.


Posted on 9 October 2023 by ScegliAuto



How to replace the rear wiper blade on a Volkswagen Passat car
Volkswagen Passat (2005-2010 / 3C, B6) Let's see in this video how to replace the rear wiper blade on a Volkswagen Passat Sedan car. We grab the rear brush with our hands, pull it as in th
How to remove the radiator of a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How to remove the radiator of a Volkswagen Passat? We open the bonnet, remove the front bumper, then, with a suitable socket wrench we go to disassem
How to replace the radiator on Volkswagen Passat
Volkswagen Passat (2005-2010 / 3C, B6) How to replace the radiator on Volkswagen Passat? We open the bonnet, remove the soundproofing panel of the engine, then, with a suitable socket wren

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos