Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touran
    4. : How to replace the third brake light in the Volkswagen Touran?

Volkswagen Touran - Video tutorial

Model: Volkswagen Touran 1T, MK 1 - Years 2003-2015
Part: Third brake light
Operation: How to replace the third brake light in the Volkswagen Touran?

In this tutorial, we can see how to replace the third brake light in the Volkswagen Touran, an extremely simple and fast operation. Before proceeding, make sure that the key is not inserted. Let's start by opening the trunk door, then unscrew the screws located inside both handles of the trunk door itself, open the horizontal door and detach the toolbox. Next, unscrew the newly released screws, separate the panel from the trunk door, and unhook the rear window frame. At this point, we can unscrew the fastening bolts of the third brake light, disconnect the connector, and install the replacement.


Posted on 7 December 2023 by ScegliAuto



To reset the service light of the Volkswagen Touran.
Volkswagen Touran (2003-2015 / 1T, MK 1) If you have performed the regular maintenance of your Volkswagen Touran first series (year 2003-2015) and the warning light continues to stay on cont
How to reset the "Service" light on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Before we can begin, we will have to go and sit in the driver's seat of our Volkswagen Touran. So let's start by pressing and holding the right butto
Replacing the rear brake light bulb in the Volkswagen Touran.
Volkswagen Touran (2003-2015 / 1T, MK 1) Before replacing the stop light bulb in the 2006 Volkswagen Touran, we proceed with arranging the car itself, on a plane or on the bridge, in order t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos