Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. New Beetle
    4. : How do you install the convertible top covering of the Volkswagen New Beetle?

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Soft top
Operation: How do you install the convertible top covering of the Volkswagen New Beetle?

In order to install the roof lining of the Volkswagen New Beetle convertible, you must first lower the roof completely so that the lining can be inserted from one side and then the other. Once the lining has been inserted, the flap of the lining can be inserted from the back. Now, the hooks on the front of the roof, located on the sides of the rear seat headrests, must be secured. After the central cushion has also been put back in place, the roof lining will be fully inserted.


Posted on 26 December 2023 by ScegliAuto



How to restore the window opening of the New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) The procedure for resetting the electric windows of the Volkswagen New Beetle is very simple. This operation requires a few minutes of your time and
Volkswagen New Beetle soft top removal and installation instructions
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In this video tutorial we will see some important instructions to be able to disassemble and install the soft top on a Volkswagen New Beetle. First w
How to remove the soft top position sensor on Volkswagen Beetle (Beetle)
Volkswagen New Beetle (1999-2012 / MK 2, 9C) We see in this guide the instructions that will allow us to remove the soft top position sensor on a Volkswagen Beetle Cabriolet, or the so-called Be

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos