Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How do you replace the power window switch in the Volkswagen Golf?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 7, Golf VII, MK 7 - Years 2012-2019
Part: Window lift switch
Operation: How do you replace the power window switch in the Volkswagen Golf?

In order to replace the power window switch of the Volkswagen Polo, you need to remove the door handle trim so that you can loosen the screws underneath. Once these screws have been loosened, you can loosen the one at the bottom of the panel, completely detaching it from the door. Once the panel has been removed, you can disconnect the connector of the switch panel and remove it from its housing in the center of the panel. After removing the switch panel, you can insert the new one, connecting it and reinstalling the panel.


Posted on 27 December 2023 by ScegliAuto



How to replace the window switch on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf VI, Golf 6, MK 6, 5K1) Before starting, we will have to open the front door of our Volkswagen Golf. So let's start by disengaging and extracting the door push-button panel,
How do you reset the power windows of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) To reset the power windows of the Volkswagen Golf, you need to fully raise the selected window by pulling up its respective button. Once the window i
How to remove the light switch on the Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Let's see in this video how to remove and replace the light switch knob on the Volkswagen Golf fourth series, but also on the Jetta, Bora and Passat,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos