Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : Disassembly of the cylinder head of the Volkswagen Jetta 2.0 TDI.

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Engine head
Operation: Disassembly of the cylinder head of the Volkswagen Jetta 2.0 TDI.

In this guide, we will see the main instructions useful for disassembling the cylinder head and replacing its gasket on the Volkswagen Jetta 2.0 TDI. First, open the hood of the car and start by disassembling and removing the rail tubing, then unscrewing the cylinder head cover screws; then proceed to remove the timing belt, removing the side cover, as shown in the video. At this point, remove the exhaust manifolds and unscrew the cylinder head fixing screws, in order to remove it; replace the gasket if necessary, following the video tutorial to the end!


Posted on 13 April 2024 by ScegliAuto



How to replace the air conditioning compressor of the Volkswagen Jetta TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) Today we will see the main instructions that will allow us to disassemble and replace the air conditioning compressor of the Volkswagen Jetta, with T
How to empty the fuel tank of the Volkswagen Jetta TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) Let's find out in this guide the steps that will allow us to empty the fuel tank, in an emergency, of the Volkswagen Jetta, with TDI engine, without
How to replace the crankshaft speed sensor on Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) In this short guide we will see the main instructions that will allow us to disassemble and replace the crankshaft speed sensor of the Volkswagen Jet

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos