Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touareg
    4. : How do you replace the fuel filter of the Volkswagen Touareg 3.0 V6 TDi?

Volkswagen Touareg - Video tutorial

Model: Volkswagen Touareg MK 2, 7P - Years 2010-2018
Part: Diesel filter
Operation: How do you replace the fuel filter of the Volkswagen Touareg 3.0 V6 TDi?

In order to replace the diesel fuel filter of the Volkswagen Touareg 3.0 V6 TDi, you need to open the hood so that you can access the components located inside the engine compartment: on the top right side of the engine block, you will find the diesel fuel filter. You will need to disconnect all the tubes connected to it and loosen the screws that secure the upper cover: by doing so, you will be able to remove the old filter from its housing and now you can insert the new one. Finally, you can reassemble all the parts that were previously removed.


Posted on 26 April 2024 by ScegliAuto



Removing the starter motor on the Volkswagen Touareg 3.0 TDI V6
Volkswagen Touareg (2002-2010 / 7L, MK 1) In today's video we will find out how to remove and replace the starter motor on the first generation Volkswagen Touareg, with 3.0 TDI V6 engine. Fir
How to replace the starter motor of the Volkswagen Touareg 2.5 TDI
Volkswagen Touareg (2002-2010 / 7L, MK 1) In this guide, let's discover the instructions that will allow us to disassemble and replace the starter motor of the Volkswagen Touareg 2.5 TDI. Fir
How to open the fuel door of the Volkswagen Touareg
Volkswagen Touareg (2002-2010 / 7L, MK 1) Today's instructions will show us how to open the fuel door and remove the cap of the Volkswagen Touareg, in simple and quick steps. First, we open t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos