Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to disassemble the central tunnel on a Volkswagen Golf 4

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years 1997-2003
Part: Dashboard
Operation: How to disassemble the central tunnel on a Volkswagen Golf 4

To disassemble the central tunnel of your Volkswagen Golf 4, you can follow these steps. Open the glove compartment completely. Look for the clips or pins that hold the compartment to the dashboard. Press or move the clips to release the compartment from the dashboard. Gently pull the compartment towards you to remove it. It is recommended to use a suitable tool, such as a plastic lever, to avoid scratching or damaging the plastics. To install the new pieces, proceed in reverse order. If you intend to replace all the interiors as shown in the video, know that it is a lengthy job and suitable only for the most experienced.


Posted on 3 May 2024 by ScegliAuto



How to remove Golf 4 central tunnel
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Do we want to remove the central tunnel of our Golf? Let's see how to proceed. We unscrew the fastening screws in the posterior part of the tunnel. U
How to disassemble and remove the armrest of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Let's see this video how to disassemble and remove the storage armrest of the central tunnel lining of a Volkswagen Golf.We bring the armrest to a ve
Volkswagen Golf central tunnel removal 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's video tutorial we will see how to remove the central tunnel of a Volkswagen Golf fourth series. First of all, let's get inside the car and

    Frequently Asked Questions

    • Golf 2012-2019 - What to do when the particulate warning light on Golf 7 comes on? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos