Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Golf
  6. : How to disassemble the mirrors of a Volkswagen Golf 8

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2024
Part: Outside rearview mirror
Operation: How to disassemble the mirrors of a Volkswagen Golf 8

Mirror adjustment: Adjust the mirror outward to create enough space to work. Cap removal: Use a plastic or rubber lever to pry on the clips between the perimeter of the mirror frame and the mirror glass itself. Be careful not to break the glass or clips. Plate unscrewing: Once the cap is removed, unscrew the round plastic plate located behind the mirror. Wire disconnection: If the mirror has defrosting or direction indicators, disconnect the wires carefully. Mirror removal: After removing the screws, you can gently remove the mirror from its seat.


Posted on 5 May 2024 by ScegliAuto



How to automatically close the exterior mirrors of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) In this video tutorial we will see how to automatically close the exterior mirrors of the Volkswagen Golf. First of all, let's connect our diagnostic
How to remove the mirrors of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) In this video we can see how to remove the exterior mirrors of the Volkswagen Golf 7. For this operation it is necessary to first remove the inner do
How to replace the LEDs on the exterior mirrors of the Golf 7
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) In this video we will show you how to replace the LEDs of the Golf 7 exterior mirrors. First remove the two mirrors from their housing and unhook the

    Frequently Asked Questions

    • Golf 2012-2019 - Why don't the Volkswagen Golf 7 mirrors close? Read Answer
    • Golf 2012-2019 - How to replace the glass in the exterior mirror in the Volkswagen Golf? Read Answer
    • Golf 2012-2019 - How much does a Golf 7 outside rearview mirror cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos