Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
6R, Polo V, MK V, MK 5, Polo 5
- Years 2009-2017 In this video we see how to replace the front headlight body of the Volkswagen Polo, if it has been broken due to an impact. We open the front hood, position ourselves in front of the headlight to be replaced, unscrew the two screws on the upper frame of the headlight with a screwdriver. Gripping the short sides, we pull the headlight forward to overcome the resistance of the fittings by acting decisively, disconnect the electrical connector and remove the headlight. Take the new headlight, insert the connector, position it in its housing and lock it with the two screws.
Posted on 15 May 2024 by ScegliAuto
How do you replace the front headlight bulb of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) The replacement of the front headlight bulb of the Volkswagen Polo is done by opening the hood, so that access to the screws that secure the headligh
How do you replace the front headlight bulb of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) The replacement of the front headlight bulb of the Volkswagen Polo is done by opening the hood and then loosening the screws that secure the headligh
How do you remove the front headlight of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) In order to remove the front headlight of the Volkswagen Polo, you need to open the hood so that you can access the screws that secure the headlight Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |