Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Battery replacement for a Volvo XC90 2

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 2 - Years 2015-2024
Part: Battery
Operation: Battery replacement for a Volvo XC90 2

In today's tutorial, we can see the entire procedure necessary to replace the battery of a Volvo XC90, second-generation model produced from the year 2015 onwards. Let's start by opening the rear trunk of the vehicle and removing the panel at the bottom and the panel on the left that covers the battery. Then, with a Torx 25 key, we remove the three screws of the partition and remove it. After that, we disconnect the negative cable of the battery first, and then the positive one, removing all its connectors as shown in the video. Now, we remove the fixing plate that holds the battery in place and finally remove the old battery to replace it with a new one following the reverse procedure.


Posted on 16 May 2024 by ScegliAuto



How do you replace the battery of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to replace the battery on the Volvo XC90, you need to open the rear hatch so that you can access the components inside the trunk: here you w
Volvo XC90 key battery replacement
Volvo Xc90 (2015-2024 / MK 2) To replace the remote control battery of your Volvo XC90 you must first unhook the remote control cover without the Volvo logo by pressing the unlock
Where is the battery located in the Volvo XC90?
Volvo Xc90 (2015-2024 / MK 2) In this video, we can see where the battery is located in the Volvo XC90 and how to proceed in case we need to replace it, which is a very simple and

    Frequently Asked Questions

    • Xc90 2015-2025 - Where is the battery located on the Volvo XC 90? Read Answer
    • Xc90 2015-2025 - Where is the battery in my Volvo XC90? Read Answer
    • Xc90 2002-2014 - Where is the battery of the Volvo CX90 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos