Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : Disassembly of the automatic gear shift knob of the Volvo S40.

Volvo S40 - Video tutorial

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Gear Shift Knob
Operation: Disassembly of the automatic gear shift knob of the Volvo S40.

These short and simple instructions will show us how to disassemble and replace the gear shift knob of the Volvo S40. First of all, we get into the car and start by grabbing the gear shift knob with both hands, pulling it upwards with force until it comes off and can be removed from the gear shift lever, as shown in the video. At this point, we can install the new gear shift knob, of the correct type, by fitting it perfectly onto the lever; it is important that it is securely attached to the gear shift lever, so as not to create any play between the lever and the knob.


Posted on 19 May 2024 by ScegliAuto



Removing the Volvo S40, C30, V50 gear knob
Volvo S40 (2004-2012 / MK 2) In this short video tutorial we will see in simple steps how to remove and replace the gear knob on various Volvo models such as the S40, C30 and V50
How do you remove the headrest of the Volvo S40?
Volvo S40 (2004-2012 / MK 2) To remove the headrest of the Volvo S40, you need to apply pressure on the lower part of the headrest, near the left support bracket. This will unloc
How do you remove the headrest of the Volvo S40?
Volvo S40 (2004-2012 / MK 2) In order to remove the headrest of the front seat of the Volvo S40, you need to press the two buttons located immediately below the headrest, at the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos