Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. :
  3. Xmax 250
    4. : How do you activate the TCS of the Yamaha Xmax 250?

Model: Yamaha Xmax 250
Part: Checks and maintenance
How do you activate the TCS of the Yamaha Xmax 250?

When the "TCS OFF" appears on the Yamaha Xmax 250, it means that the traction control system is deactivated: this often occurs due to an electronic anomaly or an error in the control unit that prevents the system from activating and functioning properly. In order to reactivate the system, the motorcycle will need to be connected to a diagnostic tool through the corresponding OBD port, which is located behind the handlebars. Once the motorcycle model and corresponding version are selected, the errors can be reset and the system can be reactivated.


Posted on 27 October 2023 by ScegliAuto



How to reset the service indicator on the Yamaha XMax 250
Xmax 250 The manual reset of the service light on the central panel of your Yamaha XMax 250 can be completed without any difficulty even if you are on your ow
How to replace the spark plug of the Yamaha Xmax 250
Xmax 250 In this short and simple guide, let's see the instructions that will allow us to disassemble and replace the spark plug of the Yamaha Xmax 250 scoote
How to replace the spark plug of the Yamaha Xmax 250
Xmax 250 Let's see in this guide the instructions that will allow us to disassemble and replace the spark plug of the Yamaha Xmax 250 scooter, but also of the

How to replace the Peugeot Viva City starter gear

Today we will see, in this video tutorial, how to disassemble and replace the starter gear of the Peugeot Viva City scooter. First of all we put our scooter on the central stand and we begin to unscrew the fixing screws located on the sides of the transmission side casing, in order to remove it; after which we unscrew the central nut of the fan, removing it and thus accessing the gear, as shown in the video. At this point we replace the starter gear with the new one, with the original spare; then we reassemble the fan and the clutch housing, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos