Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Fz S : How to replace the front headlight bulb in the Yamaha FZ-S?

Model: Yamaha Fz S
Part: Headlight bulb
How to replace the front headlight bulb in the Yamaha FZ-S?

In this tutorial, we can see how to replace the headlight bulb in the Yamaha FZ-S, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then remove the two side covers of the headlight, unscrew the two bolts that have just been released, and loosen the lower bolt. Lower the headlight afterwards, disconnect the power connector, and remove the large rubber cap. At this point, we can release the metal clip, remove the old bulb, insert the replacement, and reassemble everything following the reverse procedure.


Posted on 19 January 2024 by ScegliAuto



How to replace the front headlight bulbs on the Yamaha R6?
Yamaha R 6 As we can see in this tutorial, replacing the front headlight bulbs on the Yamaha R6 is an extremely simple and quick operation. First of all, make s
How to replace the front headlight bulbs on the Yamaha R6?
Yamaha R 6 Replacing the front headlight bulbs of the Yamaha R6, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make
How to disassemble and replace the front headlight and bulb of the Yamaha MT-07.
Mt 07 Below we will see the necessary procedure on how to disassemble and replace the front headlight and its bulb of the Yamaha MT-07 motorcycle. First, w

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos