Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Audi A5

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Headlight bulb

The following steps will show us how to disassemble and replace the headlight bulb of the Audi A5. First, open the hood of the car and start removing the top plastic cover of the engine; then disconnect the electrical connector of the bulbs, releasing the plastic tab, as shown in the video. At this point, unhook the headlight clip to remove it, removing the plastic cover and then the low beam bulb; replace the latter with the new one, applying the reverse process for reassembling the headlight!

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Audi A5 and S5.
Replacement of the front headlight bulb of the Audi A5 and S5.
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In this guide, we will see the instructions that will allow us to disassemble and replace the xenon bulb of the front headlight of the Audi A5 and S5…
How to Replace the Front Headlamp Bulb on the Audi A5
How to Replace the Front Headlamp Bulb on the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Today, we will provide the information needed to remove and replace the front headlamp bulb on the Audi A5. First, open the bonnet of the vehicle and…
How to Replace the Front Headlamp Glass on an Audi A5?
How to Replace the Front Headlamp Glass on an Audi A5?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) To replace the front headlamp glass on an Audi A5, first loosen the screws that secure the headlight unit to its housing, allowing it to be removed w…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos