Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the central tunnel cover of the Audi A5

Model: Audi A5 8W6 - Years 2018-2025
Part: Center console tunnel

Today we will see the instructions that will allow us to disassemble and replace the central tunnel cover of the Audi A5. First, we get inside the vehicle and start by removing the screw found under the glove compartment, then removing the plastic cover (prying on the sides with a thin tool); after that, we remove the gear shift knob, as shown in the video. At this point, we detach the central tunnel cover by disconnecting the two electrical connectors located underneath; we replace the central tunnel cover with the new one, reassembling everything!

Posted on 13 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you change the language of the onboard computer on the Audi A5?
How do you change the language of the onboard computer on the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In order to change the language of the onboard computer on the Audi A5, you need to turn on the instrument panel and then press the SETUP button loca…
Removing the Radio from an Audi A5
Removing the Radio from an Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Replacing the radio in an Audi A5? Let's see how to remove it using the release keys. Insert the release keys into the slots on the plastic trim of t…
How do you reset the Service indicator light on the Audi A5?
How do you reset the Service indicator light on the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) To reset the Service light that appears on the instrument panel of the Audi A5, you need to turn on the instrument panel by inserting the ignition ke…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos