Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of window motor on Audi A4 b6

Model: Audi A4 B7 - Years 2004-2008
Part: Power window motor

Lift the hood and uncover the battery and then disconnect it (always starting from the negative pole) with a 10 mm wrench. Now, most of the process consists of removing the door panel. To do this, you will obviously have to unscrew all the screws that secure it, starting from those under the horizontal gray plastic (remove it with a plastic wedge). Remove the panel by working slowly so as not to damage the joints (and maybe help yourself here with a wedge) and disconnecting the cables. At this point you can access and therefore remove the window lifter motor, as shown in the video.

Posted on 14 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to repair or replace the window lifting mechanism of the Audi A4
How to repair or replace the window lifting mechanism of the Audi A4
Audi A4 (2004-2008 / B7) Today's brief instructions will show us the process of disassembly and replacement (or repair) of the window regulator mechanism of the Audi A4. Firs…
How to Remove the Front Door Glass of an Audi A4
How to Remove the Front Door Glass of an Audi A4
Audi A4 (2004-2008 / B7) How to remove the front door glass of an Audi A4? Here's how to proceed. First, use a plastic trim tool to remove the trim pieces on the left door. U…
How to disassemble the rear side window of the Audi A4
How to disassemble the rear side window of the Audi A4
Audi A4 (2007-2016 / B8) Today's instructions will show us how to disassemble and replace the rear side glass of the Audi A4, in simple steps. First, we open the rear door an…

How to Remove the Cabin Air Filter from a Fiat Panda

See how to remove the cabin air filter (pollen filter) in the Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Using a plastic lever, remove the cover located at the bottom right of the centre tunnel; get a screwdriver or cordless drill, remove the cap from the filter housing, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing, refit the cap of the filter housing and tighten the screws. Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos