Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the front fog lamps of the Audi A5

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Fog lights

In today's video tutorial we will see how to remove and replace the front fog light bulbs of the Audi A5, following these simple steps. First we are going to remove the plastic grille of the fog light; then unscrew the fixing screws of the light, which we find below, as shown in the video. At this point we remove the fog light and disconnect the electrical connector on the back; then we replace the bulb with the new one, of the right type. We correctly insert the lamp on the fog light and reassemble everything, applying the reverse procedure!

Posted on 15 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the central tunnel cover of the Audi A5
Dismantling the central tunnel cover of the Audi A5
Audi A5 (2018-2025 / 8W6) Today we will see the instructions that will allow us to disassemble and replace the central tunnel cover of the Audi A5. First, we get inside the ve…
Replacement of the front headlight bulb of the Audi A5 and S5.
Replacement of the front headlight bulb of the Audi A5 and S5.
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In this guide, we will see the instructions that will allow us to disassemble and replace the xenon bulb of the front headlight of the Audi A5 and S5…
Where are the fuses of the Audi A5 located?
Where are the fuses of the Audi A5 located?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) The fuses of the Audi A5 are located inside the appropriate fuse boxes that are installed on the car: in this type of vehicle it will be possible to …

Other guides you may be interested in

How to Remove the Cabin Air Filter from a Fiat Panda

See how to remove the cabin air filter (pollen filter) in the Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Using a plastic lever, remove the cover located at the bottom right of the centre tunnel; get a screwdriver or cordless drill, remove the cap from the filter housing, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing, refit the cap of the filter housing and tighten the screws. Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos