Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Panel on a Citroen Saxo

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Door trim panel

How to remove the panel on a Citroen Saxo? Don’t worry, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the plastic cover of the handle, then unscrew the screws located in the handle with a screwdriver. Detach the clips securing the door panel, disconnect the cable and the power connector. Be careful not to lose any of the clips behind the plastic panel that was removed earlier. Replace the part and reassemble everything in reverse order.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on a Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) If the clock on your Citroen Saxo displays the wrong time and you want to change it manually, follow these steps. Since it is an analogue mechanism, …
Resetting the service light on the Citroen Saxo.
Resetting the service light on the Citroen Saxo.
Citroen Saxo (1996-2004 / MK 1) Today we will see the instructions on how to reset the service maintenance light of the Citroen Saxo. First of all, we get into the car and start by …
Removing the Door Panel on a Citroen Saxo
Removing the Door Panel on a Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) How to remove the door panel on a Citroen Saxo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos