Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on the Dacia Logan?

Model: Dacia Logan MK 2 - Years 2012-2022
Part:

In this tutorial, we will see how to reset the tyre light on the Dacia Logan, an extremely simple and quick operation, to be carried out only after restoring the correct pressure in each tyre. Start by entering the vehicle, then turn on the ignition and, using the button at the end of the wiper control lever, navigate to the "Set TP" screen. Once done, hold the same button until the light disappears completely. Then restart the vehicle and check that the reset was successful.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Dacia Logan?
How to Reset the Tyre Pressure Warning Light on the Dacia Logan?
Dacia Logan (2012-2022 / MK 2) To reset the tyre pressure warning light on the Dacia Logan, first inflate the tyres to the correct pressure value: this value is indicated on the st…
How to reset the TPMS light on the Dacia Logan 2
How to reset the TPMS light on the Dacia Logan 2
Dacia Logan (2012-2022 / MK 2) The tire pressure warning light comes on in Dacia vehicles when it is necessary to adjust the tire pressure, today we will explain how to reset the w…
How do you reset the tire pressure warning light on the Dacia Logan?
How do you reset the tire pressure warning light on the Dacia Logan?
Dacia Logan (2012-2022 / MK 2) To reset the tire pressure warning light of the Dacia Logan, you need to inflate the tires until they reach the corresponding pressure value: this va…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos