Do it yourself
Frequently asked questions about cars and motorcycles
As shown in the video, unscrew the screws securing the upper fairings and around the fuel tank. Now unscrew the bolt located under the seat and at the rear of the tank. Remove the tray beneath the seat, then the protection underneath. At this point, you can finish removing the tank cover. You can now access the battery, disconnect the terminals (always start with the negative terminal) and remove it from its location. Proceed in reverse for reassembly, where you will spend most of the time fitting the fairings rather than the battery. Cheers!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Monster 797 To replace the battery of a Ducati Monster 795, first lift the seat to access the screws securing the fuel tank. Once these screws are loosened, unsc…
Monster 797 In today's tutorial video, you will see the steps to remove and replace the battery of the Ducati Monster 795, as well as the 797. First, remove the …
Monster 797 In this guide, you will learn the procedure to remove and replace the starter motor on the Ducati Monster 796, following the instructions below. Firs…

How to Replace the Air Filter on the Ducati Streetfighter V4

To replace the air filter on the Ducati Streetfighter V4, loosen the screws that secure it to its housing: this is located at the front of the bike, just behind the fork. Once the securing screws are loosened, you can pull the old filter from its seat; the new one can now be inserted and secured with the appropriate screws. After installation, cover the filter housing with the designated cover and check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos