Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Climate Control Bulbs on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Instrument panel light

In today's tutorial, you will learn how to remove and replace the bulb lights on the dashboard, specifically those illuminating the climate control buttons, on a Fiat 500. First, get inside the vehicle and start by removing the climate control buttons; gently lever the sides to remove the entire panel, as shown in the video. Now you can remove the bulbs and replace them with new ones of the correct type; simply refit the panel by reversing the disassembly procedure!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Climate Control Bulbs on a Fiat 500
Replacing the Climate Control Bulbs on a Fiat 500
Fiat 500 (2007-2021 / ) This brief and simple guide outlines the steps to remove and replace the climate control bulbs on a Fiat 500. First, get inside the vehicle and start…
How to Replace the Climate Control Bulbs on the Fiat 500
How to Replace the Climate Control Bulbs on the Fiat 500
Fiat 500 (2007-2024 / 312) Through these simple instructions, you will see how to remove and replace the bulbs of the climate control switches on the Fiat 500. First, get in th…
Replacing the Climate Control Bulbs on a Fiat 500
Replacing the Climate Control Bulbs on a Fiat 500
Fiat 500 (2007-2021 / 312) In this brief guide, you will learn how to remove and replace the climate control bulbs on a Fiat 500 (316). First, get inside the vehicle and remove…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos