Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

Lift the bonnet and place the support rod. Replacing a bulb in the front headlights of a Fiat 500 is really simple, and now we will demonstrate this using the dipped beam bulb as an example. To access it, simply remove the round plastic rear cover and disconnect the connector, pull out the bulb and insert the new one you have purchased that is equivalent to the original. Reconnect the connector and refit the rear dust cover, and you're done. As you can see, this is a straightforward operation that anyone can do. Good luck!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacing Bulb on Fiat 500
Replacing Bulb on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…
How to Replace the Front Headlight Bulb on a Fiat 500 L
How to Replace the Front Headlight Bulb on a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) To replace the headlight bulbs on a Fiat 500 L, you need to fully turn the steering wheel to the right to gain access to the left headlight bulb. Rem…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos