Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: License plate light

In this tutorial, remove the number plate light unit located in the rear bumper of the Fiat 500, 500L, and 500X using a screwdriver (the lens covering the bulb holder). Once the light unit is removed, extract the bulb from it. Fit the new/LED bulb (same size and voltage), insert it into the bulb holder, and refit the light unit into the tailgate plastic, pressing until the clips lock automatically. Finally, test the operation of the replaced bulbs in your car.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulbs in the Fiat 500L
How to Replace the Number Plate Bulbs in the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In today's video, you will see a very simple maintenance task that you can perform independently. Specifically, how to replace the number plate light…
Guide to Replacing the Number Plate Lights of a Fiat 500
Guide to Replacing the Number Plate Lights of a Fiat 500
Fiat 500 (2007-2021 / 312) In this short and simple guide, you will understand the steps to disassemble and replace the number plate bulbs of a Fiat 500, following the instruct…
How to Replace the Number Plate Bulb on a Fiat 500 Abarth?
How to Replace the Number Plate Bulb on a Fiat 500 Abarth?
Fiat 500 (2007-2021 / ) To replace the number plate bulb on a Fiat 500, use a lever tool, such as a flathead screwdriver, to remove the light unit located directly above the…

    Frequently Asked Questions

    • 500 2007-2024 - Why is the license plate light on the Fiat 500 not working? Read answer
    • 500 2007-2024 - How to replace the license plate lights in the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos