Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Drums on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Brake system

In this tutorial, learn how to replace the rear brake drums on a Fiat 500, a straightforward and quick task. First, lift the rear side of the vehicle, taking all necessary safety precautions, then remove the wheel on the side you will be working on. Next, apply some penetrating spray to the hub, unscrew the two fixing bolts using the same 12mm spanner used to remove the wheel, and take off the drum. Finally, clean any dirt residue, position the replacement part, and follow the reverse procedure.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Fiat 500
Replacing the Front Brake Pads on the Fiat 500
Fiat 500 (2007-2024 / 312) This guide will show you how to remove and replace the front brake pads on the Fiat 500. First, lift the vehicle and start by removing the front whee…
How to Replace the Brake Cylinder on the Fiat 500 L from the 1970s
How to Replace the Brake Cylinder on the Fiat 500 L from the 1970s
Fiat 500 (1957-1975 / Epoca) To replace the rear brake shoe activation cylinder, position the vehicle on suitable axle stands and remove the rear wheel. Proceed to remove the fix…
How to Replace the Rear Brake Pads on a Fiat 500 312
How to Replace the Rear Brake Pads on a Fiat 500 312
Fiat 500 (2007-2021 / ) This guide shows how to replace the rear brake pads on a Fiat 500 312. The first step is to unscrew the cap of the brake fluid reservoir from inside …

    Frequently Asked Questions

    • 500 2007-2024 - On my Fiat 500 the on-board computer detects "ebd failure", what does this mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos