Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on the Ford Ka

Model: Ford Ka MK 3 - Years 2016-2019
Part: Headlight bulb

If the dipped beam bulb burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet and position yourself in front of the headlight containing the bulb to be replaced. Remove the electrical connector, take off the soft rubber cover, and unclip the metal spring that holds the bulb in place to remove it. Take the new bulb, being careful not to touch the glass with bare hands, insert the rubber cover over the electrical pins, turning it inside out, and reconnect the connector. Position the bulb in its housing, using the tabs, secure it with the metal spring, and replace the rubber cover in its correct position.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Headlamp Bulbs on a Ford Ka
Ford Ka (2008-2016 / MK 2) How do you change the front headlamp bulbs on a Ford Ka? Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and…
How to Remove a Front Headlamp and Replace the Bulbs on a Ford Ka
Ford Ka (2008-2016 / MK 2) Here’s how to remove a front headlamp and replace the bulbs on a Ford Ka: open the front bonnet by pulling the lever located at the bottom right of t…
Replacing Front Headlamp Bulbs on Ford Ka
Replacing Front Headlamp Bulbs on Ford Ka
Ford Ka (2008-2016 / MK 2) Replace the front headlamp bulb on a Ford Ka. Lift the bonnet and secure it. Remove the securing screws on either side of the headlamp, then remove t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos