Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Ford Galaxy key

Model: Ford Galaxy MK 3 - Years 2015-2023
Part: Key

We see all the necessary information in order to disassemble and replace the battery of the remote control key of the Ford Galaxy, as well as the Mondeo and S-Max. First of all, we take our remote control and start by removing the physical key from inside it; then we pry open the plastic back cover, in order to open the remote control in two parts, as shown in the video. Now it will be possible to access the electronic board and the battery, removing and replacing the latter with the new one (in this case a CR 2025 3V); finally, we reassemble the remote control and the key!

Posted on 14 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Galaxy 3 key
Ford Galaxy (2015-2023 / MK 3) To replace the small button battery located in the key of your Ford Galaxy Mk3 on your own, you must first carefully read the following guide and the…
How to Replace the Remote Battery on the Ford Galaxy
How to Replace the Remote Battery on the Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) This video tutorial shows the procedure for replacing the battery in the key/remote of the Ford Galaxy. The required battery is a CR2032, and it shou…
How to Replace the Key Battery on the Ford Galaxy 2
How to Replace the Key Battery on the Ford Galaxy 2
Ford Galaxy (2006-2015 / MK 2) With this guide, you will be able to replace the button battery in your Ford Galaxy Mk2 (2006-2015) key in just a few minutes without any difficulty.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos