Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter of the Jeep Wrangler?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Air filter

To replace the cabin filter of the Jeep Wrangler, open the glove compartment on the passenger side by detaching the side clips. This allows you to completely remove the glove compartment and access the components at the back. Here, you will need to loosen some screws so you can move the grille and slide the filter out of its housing. Once the filter is removed, install the new one and reassemble all the components you previously removed.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to Replace the Cabin Filter in a Jeep Wrangler?
How to Replace the Cabin Filter in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this tutorial, we will see how to replace the cabin air filter in a Jeep Wrangler, a very simple and quick operation. The filter in this model is …
How to Replace the Cabin Filter in a Jeep Wrangler?
How to Replace the Cabin Filter in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this video, see how to replace the cabin filter in a Jeep Wrangler, a very simple and quick operation. The filter is located behind the glove comp…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos