Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery of the remote control of the Mazda 2 MK3

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Key

The battery of the remote control that opens the doors of the Mazda 2, over time, runs out and needs to be replaced. To do this, let's equip ourselves with a small blade screwdriver, release the emergency key and with the screwdriver press inside the groove to separate the two sections of the remote control; always using the screwdriver, open the section that houses the buttons and we can access the battery compartment. Remove the old one and insert a new CR 1620, paying attention to the polarity, close the two shells and join the two sections of the remote control again.

Posted on 3 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery for the Mazda 2?
How to replace the remote control battery for the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) To replace the battery in the remote control for the Mazda 2, use a thin object as a lever to separate the two halves of the device: this will allow …
How to replace the battery of the Mazda 2 car remote control
How to replace the battery of the Mazda 2 car remote control
Mazda 2 (2007-2014 / DE, MK 2, DH) Today we will see how to replace the battery of the remote control of a Mazda 2 vehicle. To perform the replacement, we need to get a CR 16 20 model …
How to Replace the Battery of the Mazda 2 Remote?
How to Replace the Battery of the Mazda 2 Remote?
Mazda 2 (2014-2023 / MK 3, DJ) To replace the battery of the Mazda 2 remote, press the button located on the front of the remote to lift the key; then, lever it in its housing to s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos