Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace the battery of the Mazda 3 key.

Mazda 3 - Video tutorial

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Key
Operation: How to replace the battery of the Mazda 3 key.

After several years of use, it may happen that the key of your 2019 Mazda 3 no longer works due to the battery being completely exhausted. Fortunately, replacing the battery is a very simple operation and below we will discover together the various steps to put into practice. First of all, take the key and remove the back cover. Immediately afterwards, do the same with the front cover and remove the battery holder. Once you have done this, all you have to do is replace the exhausted battery with the new one. Reassemble the key covers and you're done.


Posted on 17 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Mazda 3 2013-2019 - Why is the Mazda 3 key not detected? Read Answer
    • Mazda 3 2019-2026 - Why does the Mazda 3 Mk4 Keyless system no longer work? Read Answer
    • Mazda 3 2009-2013 - How to fix a door opening remote control failure on a 2005 Mazda 3 Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos