Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset the automatic transmission on Mercedes C-Class W204?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Gearbox
Operation: How to reset the automatic transmission on Mercedes C-Class W204?

We can see in this short video tutorial how to perform an automatic transmission reset on a Mercedes C-Class w204, model produced from 2007 to 2013. So the first thing to do is to turn the key to the second position to turn on the vehicle's ignition without starting the engine. Then, we need to press and hold down the accelerator pedal for about fifteen or twenty seconds. Once this is done, we turn the key to completely turn off the vehicle while still holding down the pedal, and finally, we release the pedal and wait a couple of minutes before starting the vehicle.


Posted on 4 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - What is the problem with the automatic transmission of the Mercedes C-Class 220? Read Answer
    • Classe C 2007-2013 - What problems does the Mercedes C220 Class have? Read Answer
    • Classe C 2007-2013 - What to do if you have problems with your Mercedes C-Class W204 automatic gearbox? Read Answer
    • Classe C 2000-2007 - What to do in case of problems with the automatic transmission of the Mercedes C-Class W203? Read Answer
    • Classe C 2007-2013 - How to unlock the automatic gear lever of the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - What problems does the automatic transmission of the Mercedes C-Class have? Read Answer
    • Classe C 2000-2007 - How to perform automatic gearbox rest of the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos