Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Speakers on Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Speaker

Today, you will learn the main steps to remove the rear speakers from an Opel Corsa C. First, open the boot lid of the car and start by removing the rear plastic panel, as shown in the video: unscrew the screws found on the plastic pillars to remove them and access the rear speakers. Now, disconnect the electrical connector of the speakers and, using a screwdriver, unscrew the fixing bracket screw; remove the speaker and, if necessary, replace it with the new one. Apply the reverse procedure for reassembly!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace and install the front speakers of the Opel Corsa
How to replace and install the front speakers of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Let's briefly see the instructions that will allow us to disassemble and replace the front door speakers of the Opel Corsa. First, we open the front …
Replacement of the front speakers of the Opel Corsa
Replacement of the front speakers of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's information will show us the process of disassembling and replacing the front speakers of the Opel Corsa. First, we open the front doors of t…
Replacing the Front Speakers of the Opel Corsa
Replacing the Front Speakers of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In this guide, you will find instructions to dismantle and replace the front door speakers of the Opel Corsa. First, open the front doors of the vehi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos