Do it yourself
Frequently asked questions about cars and motorcycles

How to fit the grille without badge on an Opel Insignia?

Model: Vauxhall Insigna MK 2, Insigna B - Years 2017-2026
Part: Grille

In this video, we will see how to fit the grille without a badge on the front of the Opel Insignia. First, remove the four screws located at the top of the grille. Next, take off the wheel arch liners, secured by two screws on each side. Then, remove the grille from underneath the vehicle, where there are three screws and an electrical connector to detach. This will remove the entire front assembly. Now, remove just the grille by prying off the plastic clips from the inside of the front. You can find the sports grille on de.Csr.Shop.Info by searching for accessories for Insignia. It costs £169.00. It arrives unpainted, which is actually quite appealing. You can fit it as is or glue a grille behind it, as shown in the video. It’s a bit involved but not difficult, and it makes it more secure. Naturally, you can also have it painted later. Refit the grille and reassemble the front by reversing all steps.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video, we will see how to change the windshield washer nozzles of the Opel/Vauxhall Insignia A: we start by removing the wiper arms, taking o…
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) If one of the fog lights on your Opel Insignia second series (year 2019) has stopped working and you want to find out how to remove it, then all you …
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) This brief and simple guide shows you how to remove and replace the intercooler hose on an Opel Insignia, following the instructions below. First, op…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos