Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the heating control of the Renault Kangoo 2?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: A/C controls

The car mentioned is the Renault Kangoo 2, for which we have a video presentation attached here. In this article, we will delve into how to disassemble the heating system controls, usually for the purpose of making repairs. These controls are located on the dashboard of the car, so to remove them, you need to first remove the frame, then unscrew the pins that secure the plate on which the knobs are mounted. Once here, you will notice the electrical cable connectors behind them, which will need to be disconnected to complete the job.

Posted on 19 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
How do you disassemble the fuel pump in the Renault Kangoo 1.5 dci?
How do you disassemble the fuel pump in the Renault Kangoo 1.5 dci?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The fuel pump that is presented in the video guide uploaded here is indeed from a Renault Kangoo and will be subject to a thorough maintenance, inclu…
How do you remove the steering wheel in the Renault Kangoo 1?
How do you remove the steering wheel in the Renault Kangoo 1?
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this short video guide, we will see how to disassemble the steering wheel of the Renault Kangoo 1, in a simple and fast way. On the back of the st…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos