Do it yourself
Frequently asked questions about cars and motorcycles

How to view or reset the trip odometer on Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Warning light – error code

Viewing and, if necessary, resetting the trip odometer on the Renault Captur is really straightforward. To do this, simply turn on the instrument panel (the engine does not need to be running) and press the arrow buttons located at the end of the right stalk of the steering wheel. This will scroll through the various sections, allowing you to check, for example, the vehicle's range (based on the amount of fuel in the tank) or the outside temperature. Among the various pages, you will reach the one indicating the trip and total odometers: to reset the trip, hold down one of the two arrows.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Captur (2019-2026 / MK 2) Before you begin, sit in the driver's seat of your Renault Captur. Start by repeatedly pressing the selection button on the right side of the steerin…
Renault Captur (2019-2026 / MK 2) To reset the service light on a Renault Captur, after completing the required service, get into the vehicle and close all four doors, then turn on th…
Renault Captur (2013-2019 / MK 1) In this video we see how to reset the service light of a Renault Captur MK1: turn on the vehicle without starting the engine. Press the Menu button r…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2019-2026 - What are the warning lights of the 2020 Renault Captur? Read answer
    • Captur 2013-2019 - What do the warning lights in the dashboard of the Renault Captur mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos