Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Ligier Js50?

Model: (Various brands) Ligier
Part: Clock

The microcar we are talking about is the Ligier Js50, and we can see one in the attached video, focusing mainly on how to set the analog clock on the instrument panel. Here’s what to do: turn on the aforementioned panel, press and hold the button to the right of the clock, and after a few seconds, proceed to make the settings, continuing to use the same button to set the Hours and then the Minutes. The last step is to press and hold that button one last time to save the adjustment made. Now we can turn off the panel.

Posted on 21 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Ligier JS50
How to Reset the "Service" Light on a Ligier JS50
(Various brands) Ligier (2013-2020 / ) Before you can start, sit in the driver's seat of your Ligier JS50. First, turn the ignition on and off. Next, open the door of your microcar while r…
Where is the Battery of the Ligier JS50 Located?
Where is the Battery of the Ligier JS50 Located?
(Various brands) Ligier (2013-2020 / ) This guide shows how to access the battery location of the Ligier JS50 microcar. The electric accumulator is located under the passenger seat. Remove…
How to Replace the Battery in a Ligier Js50
How to Replace the Battery in a Ligier Js50
(Various brands) Ligier (2013-2020 / ) In this video, you will see the procedure to replace the battery in a Ligier Js50 microcar. The battery in this microcar is located under the passeng…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos