Hoe de remblokken te vervangen in de Mazda CX-5.

Replacing the brake pads on a Mazda CX-5 requires some basic mechanical skills and the appropriate tools. Here is a general guide to replacing the brake pads on a Mazda CX-5:

Note: Before starting any work on the brakes, make sure to park the car on a flat surface, lift the car safely using jack stands or a lift, and always wear the appropriate safety gear. Gather all necessary materials: new brake pads, brake grease, wrenches or allen keys, screwdriver, C-clamp or brake piston compressor tool, tool to push back the brake piston, brake fluid (if necessary), protective gloves, and a clean cloth.

Lift the car: Using jack stands or a lift, safely lift the car so you can work comfortably on the wheel.

Remove the wheel: Using the correct wrench or allen key, loosen the wheel bolts and remove the wheel from the hub.

Remove the worn brake pads: You will find the brake calipers wrapping around the brake disc. Using a screwdriver or appropriate wrench, loosen the brake caliper mounting bolts and gently lift the caliper. Remove the old brake pads.

Prepare the new brake pads: Apply a thin layer of brake grease to the back side of the new brake pads. This will help reduce friction and noise.

Push back the brake piston: The brake piston in the brake caliper will need to be pushed back to make room for the new pads. You can do this using a C-clamp or brake piston compressor tool. Make sure to open the brake fluid reservoir cap to avoid damaging it.

Install the new brake pads: Place the new brake pads into the brake caliper, making sure they are properly aligned with the brake disc. Make sure the brake pad sensors (if present) are positioned correctly.

Reposition the brake caliper: Make sure the brake pads are properly positioned and then reposition the brake caliper. Tighten the brake caliper mounting bolts securely.

Repeat steps 4-8 for the other wheels: Follow the same steps to replace the brake pads on the other wheels of the vehicle.

Remount the wheels: Remount the wheels onto the hub and securely tighten the wheel bolts.

Lower the car: Remove the jack stands or lower the car using a lift.

Pump the brake pedal: Once the car is on the ground, repeatedly press the brake pedal to restore pressure in the brake system.