Zrób to sam
Najczęściej zadawane pytania dotyczące samochodów i motocykli

Przegląd i czyszczenie gaźnika Volkswagen Maggiolino 1200 z 1976 roku.

Model: Volkswagen Maggiolino MK 1 - Lata 1938-1980
Część: Gaźnik

The carburetor we are going to work on is a Solex PCT 30 that has been removed from the manifold. We remove the gasket, which we will then replace, and remove the vacuum tube of the spark advance. We disassemble the upper body of the carburetor by unscrewing the 4 screws: we remove the gasket that we will then replace. Using a 14 mm wrench, we remove the fuel flow valve. The carburetor body has a choke, and we need to check if it is working; we can do this very simply with wires, by connecting the positive to the plug and grounding the negative. The throttle should open. We also remove the choke, also removing the diaphragm that we will replace. When we disassemble the various parts, we put everything aside, because we will replace the parts that deteriorate and are part of a kit, while we will need to keep all the parts that need to be reassembled, perhaps by photographing them or carefully noting them down. Where possible, we perform functional checks. When we have the carburetor body, we clean it well and reassemble it, replacing the old and damaged parts. The whole operation is not very simple but possible, you just need to have some manual skills and a calm half an hour to do it all.

Wstawiono 2 July 2023 by ScegliAuto

Samouczek wideo

Powiązane tutoriale

Volkswagen Maggiolino (1938-1980 / MK 1) W tym poradniku wideo zobaczymy, jak ustawić fazę zaworów w Volkswagenie Maggiolino 1200. Operację tę należy przeprowadzać co 10 000 kilometrów. Na p…
Volkswagen Maggiolino (1938-1980 / MK 1) Dzisiaj wyjaśnimy procedurę samodzielnego demontażu przedniego siedzenia w samochodzie Volkswagen Beetle 1200. Aby przeprowadzić tę operację, będzies…
Volkswagen Maggiolino (1938-1980 / MK 1) W tym samouczku możemy zobaczyć, jak wymienić elastyczne rury paliwowe w Volkswagenie Garbusie 1200. Do tego zadania będziemy potrzebować odpowiednie…

Inne przewodniki, które mogą Cię zainteresować

Jak sprawdzić poziom oleju w Jeepie Renegade?

Aby sprawdzić poziom oleju w Jeepie Renegade, otwórz maskę, aby uzyskać dostęp do komponentów w komorze silnikowej. Po lewej stronie w dolnej części bloku silnika znajdziesz miarkę poziomu oleju. Wyciągnij ją i dokładnie wyczyść szmatką. Po oczyszczeniu włóż ją z powrotem na miejsce i natychmiast wyciągnij. W ten sposób sprawdzisz, czy poziom oleju znajduje się pomiędzy minimum a maksimum. Na koniec włóż miarkę z powrotem na miejsce.

Obejrzyj film!


by ScegliAuto

Inne filmy