Fă-o singur
Întrebări frecvente despre mașini și motociclete

Instalare autoradio aftermarket

Model: Audi A4 B7 - Ani 2004-2008
Parte: Radio auto

The first operation to be carried out is to fix the anchoring tabs of the new car radio to its support through the appropriate pre-drilled bracket. Then insert the car radio into the support to verify that it is properly hooked and then release it through the provided keys. Also, verify the suitability of the adaptation wiring for connection to the original system by making the appropriate connections.

At this point, proceed with the removal of the original car radio from the vehicle dashboard: insert the unlocking keys into the 4 slots located at the corners of the car radio and extract it by disconnecting the plugs connected to it and attach them to the adaptation wiring to connect the new car radio.

Remove the 2 fixing screws of the original car radio support, insert the adaptation frame of the new car radio and reapply the fixing screws.

Insert the support frame and fix it by folding some tabs; connect the plugs of the adaptation wiring to the new car radio and insert it into its support until it is fully hooked; finally, apply the outer frame and perform a functionality check.

Introdus la 17 June 2016 by ScegliAuto

Acest videoclip nu este disponibil momentan

Tutoriale conexe

Audi A4 (2000-2004 / B6) În anii '80 și '90, manometrul de presiune al turbocompresorului era o piesă prezentă întotdeauna în bordul multor mașini supraalimentate, dar apoi a…
Audi A4 (2000-2004 / B6) The translation in Romanian would be: Ghidul ne arată în câțiva pași simpli cum să înlocuim autoradioul mașinii noastre. Dacă vechiul autoradio nu e…
Audi A4 (2004-2008 / B7) Reglajul cu filet ajustabil este o soluție pentru suspensii inteligente care combină avantajele unui sistem de reglare a amortizării cu soluțiile aft…

Cum să înlocuiți bateria telecomenzii Volvo XC40?

În acest tutorial putem vedea cum să înlocuim bateria telecomenzii Volvo XC40, o operațiune extrem de simplă și rapidă. Pentru a face acest lucru, avem nevoie de o baterie de rezervă de tip CR2032 și, eventual, un mic șurubelniță cu vârful plat. În primul rând, îndepărtăm capacul frontal acționând butonul situat pe inelul metalic, apoi identificăm al doilea buton, îl acționăm și îndepărtăm capacul opus. Apoi deschidem capacul circular, scoatem bateria veche și introducem cea de rezervă în sens opus. În final, reasamblăm totul.

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri