Fă-o singur
Întrebări frecvente despre mașini și motociclete

Demontarea stopului din spate și înlocuirea unei becuri la Audi A4.

Model: Audi A4 B7 - Ani 2004-2008
Parte: Stop spate

Before installing the rear headlight bulb of the Audi A4, we must first ensure that we can work on it safely and stably in order to protect our well-being. This precaution should be taken whenever performing maintenance operations on a car. Therefore, we position our car on a lift or on a flat surface. At this point, we open the rear trunk door. On the inner edge of the opening hole of the trunk (in the area where the closing door hits), corresponding to the rear headlight, where the bulb we want to replace is housed, we remove a cover and, using the appropriate key and a simple precaution (as shown in the pictures) to prevent the screw from falling into the gap created by the interior lining, we unscrew the screw that holds the headlight block in place. Now, using our hands, we remove the headlight block from its seat, being careful not to force it. After completing this operation, all we have to do is disconnect the electrical supply, remove the bulb holder block, and proceed with the replacement. We put everything back in place following the seen operations but in reverse order!

Introdus la 7 December 2020 by ScegliAuto

Tutorial video

Tutoriale conexe

Audi A4 (2007-2016 / B8) Vrem să înlocuim becurile farurilor din față ale unui Audi A4 și nu știm cum să procedăm? Să vedem împreună în tutorialul video cum să facem asta. De…
Audi A4 (2004-2008 / B7) Înainte de a începe, va trebui să deschidem hayonul din spate al Audi A4. Începem prin a debloca și muta capacul șurubului de fixare a stopului, apoi…
Audi A4 (2014-2024 / B9) Deschideți capacul portbagajului și observați că lateral există două mici capace rotunde. Ridicați cel care acoperă stopul și desfaceți șurubul desco…

Cum să înlocuiți bateria telecomenzii Volvo XC40?

În acest tutorial putem vedea cum să înlocuim bateria telecomenzii Volvo XC40, o operațiune extrem de simplă și rapidă. Pentru a face acest lucru, avem nevoie de o baterie de rezervă de tip CR2032 și, eventual, un mic șurubelniță cu vârful plat. În primul rând, îndepărtăm capacul frontal acționând butonul situat pe inelul metalic, apoi identificăm al doilea buton, îl acționăm și îndepărtăm capacul opus. Apoi deschidem capacul circular, scoatem bateria veche și introducem cea de rezervă în sens opus. În final, reasamblăm totul.

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri