The guide shows how to reset the scheduled maintenance light on the BMW S1000RR. To perform this maintenance, it is necessary to use a diagnostic device with an OBD socket (OBDLink), MotoScan software, and a cable with an OBD-10pin connector. With the instrument panel on, the first operation to be performed is to connect the adapter cable to the socket on the motorcycle; at this point, it is possible to connect the OBDLink to the newly installed cable. Connect to the OBDLink network via Bluetooth on your mobile phone. Before performing any operation, check if there are any firmware updates for the OBDLink. From the MotoScan application, it is possible to reset the service light; it is recommended to purchase the pro version of the application. Select the motorcycle model; select the tab related to the instrument cluster and wait for the procedure to finish; by clicking again on the selected tab, the service reset button will be displayed. From this page, it is possible to modify some parameters related to the occurrence of the light. After pressing the reset button, the warning light on the instrument panel will turn off. At this point, it is possible to turn off the engine and disconnect the device. Check the successful completion of the operation by turning on the instrument panel again.