Fă-o singur
Întrebări frecvente despre mașini și motociclete

Înlocuirea perilor ștergătoarelor de parbriz

Model: BMW Seria 3 E36 - Ani 1990-2001
Parte: Ștergătoare

Before proceeding with the replacement of the windshield wiper blades, make sure that the new ones are the right length!
In the case of traditional type wiper blades, lift the wiper arm, rotate the wiper blade arm 90°, and after releasing the locking tab, pull it down to remove it from the arm.
Then, check which of the attachment clips included in the new blades' packaging is compatible with the one that was just removed and attach it to the appropriate slot on the new blade's arm.
Pass the arm through the designated hole on the arm until it surpasses the attachment clip, which will then be hooked onto the arm through the locking tab.
If the blade is of the so-called flat type, it is generally attached to the arm with a sliding system: simply press the attachment tabs and slide the blade forward to detach it.
Furthermore, it is possible to replace traditional type blades with flat ones through a special interchangeable attachment system.
Another system involves securing the arm to the blade through a lock: simply release the lock to remove the arm.

Introdus la 15 June 2016 by ScegliAuto

Tutorial video

Tutoriale conexe

BMW Seria 3 (2005-2013 / E91, E90, E92) Înlocuirea perilor de ștergătoare este o întreținere pe care cu siguranță o puteți face singuri, fără dificultăți majore; primul pas este să alegeți …
BMW Seria 3 (2005-2013 / E91, E90, E92) Înainte de a începe, va trebui să coborâm din habitaclul mașinii noastre BMW Seria 3, apoi să ne îndreptăm către partea din față a mașinii. Începem p…
BMW Seria 3 (2005-2013 / E91, E90, E92) Pe lateralul manetei de comandă a ștergătoarelor de parbriz, se află butonul de activare a senzorului de ploaie: apăsând butonul, se aprinde un led v…

Cum să înlocuiți bateria telecomenzii Volvo XC40?

În acest tutorial putem vedea cum să înlocuim bateria telecomenzii Volvo XC40, o operațiune extrem de simplă și rapidă. Pentru a face acest lucru, avem nevoie de o baterie de rezervă de tip CR2032 și, eventual, un mic șurubelniță cu vârful plat. În primul rând, îndepărtăm capacul frontal acționând butonul situat pe inelul metalic, apoi identificăm al doilea buton, îl acționăm și îndepărtăm capacul opus. Apoi deschidem capacul circular, scoatem bateria veche și introducem cea de rezervă în sens opus. În final, reasamblăm totul.

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri