Fă-o singur
Întrebări frecvente despre mașini și motociclete

Resetarea luminii airbagului la un automobil.

Model: BMW Seria 5 E61, E60 - Ani 2003-2010
Parte: Lampă de avertizare – cod de eroare

Having the airbag light constantly on can be annoying and distracting while driving, but in any case, it is a symptom of a small setting anomaly that can easily occur, especially when operations involving the electrical part of the car are performed, such as installing a car radio. But fortunately, it is possible to solve this small inconvenience with a few simple steps without resorting to a professional auto electrician or specialized center. First of all, position ourselves inside our car and turn the ignition key in such a way as to start the instrument panel and not the engine. The airbag light will remain on for about 7 seconds before turning off, immediately after turning off the instrument panel, returning the key to the off position in essence. Wait for about 5 seconds and repeat the operation explained in the first two points. Repeat the complete operation for the third time. At this point, start the instrument panel, wait for the airbag light to turn off, and start the engine to verify the effectiveness of the operation. The airbag light will no longer turn on, and we can drive without any distraction because we have solved the problem.

Introdus la 21 July 2018 by ScegliAuto

Tutorial video

Tutoriale conexe

BMW Seria 5 (2003-2010 / E61, E60) Mai jos vom vedea pașii care ne vor permite să resetăm lumina de avertizare a airbag-ului și, în general, toate luminile de avarie ale motorului BMW …
BMW Seria 5 (1995-2003 / E39) Acest video ne arată cum să resetăm indicatorul de service pentru uleiul de motor. În primul rând, fără a roti cheia, introducem instrumentul de rese…
BMW Seria 5 (2003-2010 / E61, E60) Când se aprinde lumina TPMS pe un vehicul BMW Seria 5, modelul E60 din 2005, înseamnă că trebuie să reglați presiunea pneurilor mașinii. După ce ați …

Alte ghiduri care te-ar putea interesa

Cum se resetează indicatorul de presiune a pneurilor la Suzuki Jimny?

Pentru a reseta indicatorul de presiune a pneurilor la Suzuki Jimny, trebuie mai întâi să umflați pneurile, aducându-le la valoarea de presiune indicată pe autocolantul corespunzător: acesta se găsește în partea de jos a stâlpului ușii șoferului. După ce pneurile au fost umflate, trebuie să introduceți cheia de contact și să porniți tabloul de bord: puteți selecta ecranul care indică presiunea pneurilor, verificând că valorile au fost modificate. Așteptând câteva secunde, indicatorul de presiune a pneurilor se va stinge automat.

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri