|
Fă-o singur
| |||
| ||||
Cum se demontează bordul de la Fiat Grande Punto EVO.
Model: Fiat Punto
199, MK 3, Punto EVO, Grandepunto
- Ani 2005-2018
The guide shows how to disassemble the dashboard of the Fiat Grande Punto EVO. As the first step, it is necessary to remove the driver's side airbag and the steering wheel. After removing these two parts, the cover of the turn signal lever must be removed; at this point, it is possible to remove the frame of the instrument panel and the panel itself. There are two fixing screws to be removed. Remove the car radio and the support frame; the control panel block and the air vents. At this point, it is possible to unscrew the first fixing hex screw of the dashboard, located under the just unscrewed block. At this point, it is possible to remove the glove compartment. Now it is possible to remove the finishing plate located on the windshield air vents; this plate is held by pressure. At this point, it is possible to unscrew the other fixing screws of the dashboard. At this point, it is possible to remove the control panel on the driver's side, applying pressure on the two fixing tabs from inside the dashboard. Now it is possible to remove the other support screw from the open compartment. At this point, it is possible to disassemble the dashboard.
Introdus la 19 June 2021 by ScegliAuto
Acest videoclip nu este disponibil momentan
Tutoriale conexe
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
Dorim să demontăm rezistența ventilatorului de încălzire de pe o mașină Fiat Grande Punto. Vom vedea cum se demontează rezistența ventilatorului. Înd…
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
În videoclipul de astăzi vom vedea cum să demontăm și să înlocuim farurile din spate la un Fiat Grande Punto și Punto Evo, urmând acești pași simpli.…
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
Astăzi vom vedea, în acest tutorial video, cum să demontăm și să înlocuim stopul din spate al Fiat Punto Evo, dar și al Grande Punto. În primul rând,…
Alte ghiduri care te-ar putea interesa
|
Cum să înlocuiți lichidul de răcire al radiatorului unui Peugeot 206.
Să vedem cum se înlocuiește lichidul de răcire al radiatorului de la un Peugeot 206. Dezvăluim cu o cheie tubulară furtunul radiatorului în partea de jos, lăsăm lichidul plin de rugina și deșeuri să se scurgă într-un recipient. Spălăm sistemul de răcire cu o furtună specială (așa cum se arată în videoclip), efectuăm acest proces până când tuburile și radiatorul sunt complet curate. Conectăm furtunurile demontate anterior, strângem șuruburile de fixare ale clemelelor metalice ale radiatorului în compartimentul motorului. Ne pregătim să completăm cu noul lichid de răcire. În final, testăm eventualele scurgeri ale sistemului. by ScegliAuto Alte videoclipuri
|
|
Pentru publicitatea pe acest site Scrie la info@scegliauto.com
ScegliAuto nu este responsabil pentru eventualele inexactități ale datelor din listă. Pentru a semnala o posibilă inexactitate sau activitatea dvs. (dacă sunteți titularul activității respective), vă rugăm să scrieți la info@scegliauto.com
Numărul de secunde necesare pentru generarea paginii: 0.047
(c) ScegliAuto 2026 - info@scegliauto.com - Politica de confidențialitate Cod TVA: IT01247470535 |