Fă-o singur
Întrebări frecvente despre mașini și motociclete

Înlocuirea rulmentului roții față

Model: Ford Mondeo MK 1 - Ani 1993-2000
Parte: Rulment

Before lifting the vehicle, loosen the central nut that secures the half shaft to the hub and the wheel fastening pins; then lift the car and place it on suitable jack stands, complete the wheel removal and continue by disconnecting the steering tie rod from the hub, removing the brake caliper, the ABS speed sensor, and complete the removal of the half shaft fixing nut. Remove the brake caliper support, the suspension control arm ball joint, and the shock absorber fixing pins from the hub. At this point, it is possible to remove the complete wheel hub with the disc: unscrew the disc securing nuts to remove it from the hub and continue by extracting the disc support from the hub (a damaged part of the bearing will come off). Then remove the circlips and extract the remaining part of the bearing from the hub support, insert the new bearing, secure it with the corresponding circlips, and reinsert the hub itself using a press or a system made of threaded rod and bushings.

Introdus la 24 August 2016 by ScegliAuto

Tutorial video

Tutoriale conexe

Ford Mondeo (1993-2000 / MK 1) Cu ocazia înlocuirii rulmentului de la butucul roții, prima operație de efectuat este demontarea piuliței din centrul butucului: înainte chiar de a r…
Ford Mondeo (2000-2007 / MK 2) Cum să demontăm un rulment de roată de pe un Ford Mondeo. Amplasăm mașina pe un pod cu coloane, slăbim piulițele cu o cheie telescopică și ridicăm la…
Ford Mondeo (1993-2000 / MK 1) Iată cum să înlocuiți rulmentul roții din față a unui Ford Mondeo. După ce ați pus frâna de mână, slăbiți piulița de pe butuc. Ridicați mașina cu un …

Unde se află filtrul de carburant la Volvo XC60?

În acest videoclip putem vedea unde se află filtrul de combustibil în Volvo XC60 și cum să procedăm în cazul în care avem nevoie să-l înlocuim. Așa cum se arată, filtrul este amplasat în partea inferioară a motorului, între semiaxul stâng și prinderea barei anti-ruliu. Pentru a înlocui filtrul, ne deplasăm mai întâi sub vehicul, luând toate măsurile de siguranță necesare, apoi, folosind o cheie de 18 mm, deschidem supapa de scurgere și lăsăm să iasă eventualele impurități. Apoi desfacem carcasă, îndepărtăm filtrul vechi, introducem înlocuitorul împreună cu o garnitură nouă și asamblăm totul la loc.

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri