Fă-o singur
Întrebări frecvente despre mașini și motociclete

Înlocuirea placuțelor de frână din față.

Model: Ford Focus MK 1 - Ani: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Parte: Plăcuțe de frână

Vezi alte generații:
Tutorial video

Raise the car with a jack at the wheel where you want to work. Unscrew the fixing bolts of the wheel with a pneumatic screwdriver and remove it. Find the plastic caps that protect the fixing bolts of the caliper and remove them with the help of a small screwdriver.

Loosen the fixing bolts of the caliper with a 7mm hex key and remove it. Before removing the old brake pads, use a lever to retract the piston and create the housing for the new pads, which clearly have a greater thickness. At this point, remove the old pads and insert the new ones, being careful to make the tabs of the rear pad adhere inside the piston and to correctly house the front pad's sealing spring.

Then reposition the caliper and tighten the fixing bolts. Reapply the plastic protection caps and make sure the front pad's sealing spring is properly engaged in its housing.

Remount the wheel by screwing the bolts with the pneumatic screwdriver and check the correct tightening after lowering the car and removing the jack. Before driving, remember to pump the brake pedal until it offers the appropriate resistance, thus correctly repositioning the cylinder.


Introdus la 7 February 2014 by ScegliAuto


Tutoriale conexe

Ford Focus (1998-2004 / MK 1) Ridicați mașina pe suporturile speciale pentru mașini și demontați roata din față; îndepărtați capacele de protecție de la fixarea clemei pe suport ș…
Ford Focus (2011-2018 / MK 3) Ridicați mașina pe suporturi speciale pentru mașini și demontați roata din față; folosiți un șurubelniță pentru a face levier între disc și clește pe…
Ford Focus (2004-2011 / MK 2, Focus 2) Vom vedea înlocuirea placuțelor de frână de pe spatele unui Ford Focus. Ridicăm mașina pe un pod cu coloane până la înălțimea dorită, îndepărtăm roat…

Cum să activezi închiderea și deschiderea automată a oglinzilor retrovizoare la Jeep Compass.

Să vedem pe scurt instrucțiunile care ne vor permite să activăm închiderea și deschiderea automată a oglinzilor retrovizoare exterioare ale Jeep Compass. În primul rând, urcăm în mașină și pornim bordul; apoi apăsăm butonul pe care îl găsim sub reglarea geamului oglinzii, pentru a deschide electric oglinda, așa cum este ilustrat în videoclip. Apăsând butonul în direcția opusă, vom închide oglinzile; lăsând butonul activat, oglinzile se vor deschide și se vor închide complet automat!

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri