Înlocuirea becurilor pentru interior, mersul înapoi și plăcuța de înmatriculare.

Despite this being a demonstrative video on how to replace traditional light bulbs with LED ones, the images can certainly be useful to those who simply want to replace a burnt-out bulb. In this case, the kit is a Canbus type to prevent light flickering and error messages on the dashboard. Starting with the front interior light, we lever with the appropriate tool on one side and then the other, removing the transparent plastic. To remove very small bulbs, it is advisable to use a piece of adhesive tape. In the case of LED lights, always check if they turn on and if not, rotate them because this type of light requires polarity to be respected, similar to a battery. Reassemble the transparent plastic, observing the arrangement of the tabs, as they are horizontal on one side and vertical on the other. Now let's move on to the central light. We lever to lift the transparent cover from the side of the switch. Replace the bulb and close everything back up. If you have opted for an LED light, always remember the polarity and slightly rotate the bulb towards the center of the cabin. For reverse lights, unscrew the two screws on the inner side of the taillight. Remove the optical group and disassemble the bulb holder by rotating it half a turn. Replace the bulb and reassemble the component. As for the license plate light, simply squeeze the two tabs with your fingers to remove the support and then rotate the bulb holder to access and change the bulb. Car model: Jeep Wrangler / Rubicon / Sahara / Unlimited Sport / 2-4 doors Year: 2007 > Required tools: flat blade and/or fork tools, screwdriver or screwdriver with a cross tip.