|
Fă-o singur
| |||
| ||||
Înlocuirea bujiilor și curățarea cablurilor.
Model: Mercedes CLS
C219, MK 1
- Ani 2004-2010
Remove the plastic cover protecting the engine with delicacy by simply lifting it upwards after disconnecting the air tubes attached to it. To avoid confusion with the cables, proceed to disconnect only the first spark plug. Using a ratchet wrench, unscrew the coil fastening screw connected to the first spark plugs and remove the connecting pipe upwards. Check the number on the coil and on the pipes. At the bottom of the well is the first spark plug. Before proceeding with the disassembly, carefully clean the wells with compressed air to remove any dirt that may fall into the combustion chamber. Using the appropriate spark plug wrench, which has a rubber attachment device, gently insert it onto the spark plug head and unscrew it. Be careful not to drop foreign objects into the well. Replace the spark plug with the same model, carefully inserting it into the well, always using the appropriate wrench and gently turning it to ensure it is screwed in correctly. If there is resistance, remove it and try again. The spark plugs should be tightened with a torque wrench, if the wrench is not available, tighten without excessive force. Proceed with the same operation with the other spark plugs. Before reassembling, clean the cables and contacts of the pipes with an anti-oxidant spray.
Introdus la 12 October 2015 by ScegliAuto
Tutorial video
Tutoriale conexe
Mercedes CLS
(2004-2010 /
C219, MK 1)
Se recomandă să efectuați această întreținere doar dacă aveți cunoștințe bune de mecanică generală. În momentul în care înlocuiți curea, înlocuiți și…
Mercedes CLS
(2004-2010 /
C219, MK 1)
Operația de înlocuire a becului nu necesită multe și competențe specifice, chiar dacă în noile mașini pare să devină puțin mai dificilă. Pentru a înl…
Mercedes CLS
(2004-2010 /
C219, MK 1)
Deschideți capota din față, deconectați conductele de aspirație, îndepărtați mai întâi partea din față a capacului de plastic al motorului și apoi pa…
Alte ghiduri care te-ar putea interesa
|
Cum se deschide hayonul blocat la Peugeot 407?
În Peugeot 407 se poate întâmpla ca hayonul să se blocheze, de exemplu din cauza unei probleme la butonul de comandă sau la acționatorul încuietorii. În aceste cazuri putem deschide hayonul în mod de urgență urmând procedura simplă prezentată în acest tutorial. Începem prin deschiderea ușilor din spate, apoi coborâm spătarul scaunului acționând maneta de deblocare corespunzătoare. Apoi ne deplasăm în interiorul portbagajului, identificăm încuietoarea și o acționăm manual ajutându-ne cu un șurubelniță cu vârf plat. Hayonul va fi acum liber să fie deschis. by ScegliAuto Alte videoclipuri
|
|
Pentru publicitatea pe acest site Scrie la info@scegliauto.com
ScegliAuto nu este responsabil pentru eventualele inexactități ale datelor din listă. Pentru a semnala o posibilă inexactitate sau activitatea dvs. (dacă sunteți titularul activității respective), vă rugăm să scrieți la info@scegliauto.com
Numărul de secunde necesare pentru generarea paginii: 0.112
(c) ScegliAuto 2026 - info@scegliauto.com - Politica de confidențialitate Cod TVA: IT01247470535 |