Înlocuirea uleiului și a filtrului de ulei al motorului.

Raise the car on a car lift or on special car stands.
Intercept the drain plug of the oil pan and after placing a suitable capacity basin (about 5 liters), unscrew the plug and drain the used oil.
Next, open the front hood and intercept the plug of the oil filter container (cartridge filter): it is located on the left front side, laterally.
Unscrew the plug and remove the old cartridge, replace it with the new one and also replace the O-ring gasket of the plug provided with the filter.
Screw the plug back in and fill the engine with new oil according to the SAE specifications (5W-30) and the quantities indicated in the user and maintenance manual.
At this point, perform the manual reset of the SERVICE indicator:
1) Insert the ignition key and simultaneously press the reset button for partial kilometers when the dashboard turns on;
2) Keep it pressed for about 8 seconds and after entering the service menu, continue to hold it pressed;
3) As soon as the main screen reappears, immediately release the reset button for partial kilometers and immediately press it again for 5 seconds;
4) At this point, the SERVICE menu will appear;
5) By pressing the button next to the turn signal lever, you can select the various SERVICES (oil-brake pads-front and rear, etc.);
6) To reset the various SERVICES, hold down the button next to the turn signal lever until the RESET message appears... and you're done.