Cum să înlocuiți plăcuțele de frână de pe față la Peugeot 207.

The replacement of the front brake pads on a Peugeot 207 is a fairly simple operation that can be easily done with a few tools and without the intervention of professionals. First, the pressure inside the braking system must be reduced. To do this, simply unscrew the cap of the brake fluid reservoir located in the engine compartment behind the battery. Once this is done, the car can be lifted on both sides and the wheel can be removed to access the caliper. The caliper will have a slot on the outer side, into which a lever or a large screwdriver can be inserted to separate the pads from the disc, allowing the pistons to retract into their housing. Once this is done, a horizontal movement of the outer side of the caliper will be noticed, and the two bolts on the rear side of the caliper can be unscrewed. This operation will allow the caliper to open in two parts, providing access to the pads, which will be held in place by two metal springs on both ends. At this point, the old pads can be removed and the new ones can be inserted. To avoid annoying squeaks, it is recommended to apply copper grease to the contact points between the caliper and the pad, being careful not to get any on the friction material. Before reassembling everything, it is also advisable to thoroughly clean the caliper and all the contact surfaces, and after completing the work on both sides of the car, the cap of the brake fluid reservoir should be put back on and the pedal should be pumped to restore pressure to the system.