|
Fă-o singur
| |||
| ||||
Cum să efectuați revizia la scuterul Piaggio Berverly 350
Model: Piaggio Beverly 350
Tutorial video
The guide shows how to perform the maintenance on the Piaggio Beverly 350 Sport scooter. After placing the vehicle on the stand, a test is performed on the engine noise and compression. The engine is cleaned by adding an additive to the motor oil and running the engine for 15 minutes; at the same time, the fuel supply system is also cleaned with the appropriate additive. The air filter can be replaced after removing the protective cover. It is also advisable to clean the throttle body with the appropriate cleaner at this stage. The new filter is reassembled and the box is closed. The old motor oil is drained through the drain valve and the old oil filter is replaced. The tank can be filled with new lubricant, paying attention to the specifications required by the manufacturer. The oil level is checked and a second compression test is performed. The spark plug is replaced and the engine is allowed to run for a few minutes. The motor oil level is checked again. The maintenance is complete.
Introdus la 5 July 2021 by ScegliAuto
Tutoriale conexe
Beverly 350
În acest videoclip vedem instrucțiunile care ne vor permite să demontăm și să înlocuim evacuarea originală cu una Akrapovic pe un scuter Piaggio Beve…
Beverly 350
Hai să vedem cum să demontăm curea de distribuție și variatorul unui scuter Piaggio Beverly 350, în câțiva pași simpli. În primul rând, vom îndepărta…
Beverly 350
În acest videoclip putem vedea unde se află bateria în scuterul Piaggio Beverly 350 și cum să accesăm la ea, util în cazul în care avem nevoie să o î…
|
Cum să înlocuiți becul farului față la Triumph Tiger 800?
Replacing the headlight bulb on the Triumph Tiger 800, as we can see in this tutorial, is an extremely simple and fast operation. First of all, let's make sure that the key is not inserted, so that we can work safely. Then, let's locate the large cap at the back of the headlight and unscrew it. Next, we disconnect the power connector by pulling it outwards, release the metal clip, and remove the old bulb from its housing. At this point, we can insert the replacement bulb, avoiding direct contact with the glass with bare hands, and follow the reverse procedure. by ScegliAuto Alte videoclipuri
|
|
Pentru publicitatea pe acest site Scrie la info@scegliauto.com
ScegliAuto nu este responsabil pentru eventualele inexactități ale datelor din listă. Pentru a semnala o posibilă inexactitate sau activitatea dvs. (dacă sunteți titularul activității respective), vă rugăm să scrieți la info@scegliauto.com
Numărul de secunde necesare pentru generarea paginii: 0.103
(c) ScegliAuto 2026 - info@scegliauto.com - Politica de confidențialitate Cod TVA: IT01247470535 |